Unusual use of WD-40
WD-40 is a solvent with added mineral oil. The product has a low viscosity, which makes it possible to use it as an aerosol and penetrate into any, even the smallest holes, cavities or cracks.- Popularity The WD-40 is explained by its effectiveness and its ability to help unscrew any rusty or patched threaded connection. This action of WD-40 is ensured by its composition and principle of operation: the volatile solvent (white spirit) corrodes and softens various kinds of contaminants, and after its evaporation, a non-volatile lubricant (mineral oil) remains on the treated surface, which provides protection of parts or easy thread loosening. Pay attention! There are many fakes and analogs of WD-40 on the market, which, with their external similarity, have a different composition and purpose. It is for this reason that the debates about the effectiveness of the WD-40 are still being conducted, and the opinions on it are ambiguous: one helped, and some, after using the fake, the metal parts were covered with rust.Therefore, it is recommended to purchase the product in specialized stores, rather than from questionable sellers on the market. The standard scope of the WD-40 is very extensive: from helping to unwind the rusty bolts to preserving various mechanisms and equipment. But besides this, the aerosol solvent can be used to solve non-standard problems. Some unusual ways of using WD-40 are discussed below.
Easy cleaning of hands from technical impuritiesSince WD-40 contains a solvent, it is easy for them to wash greasy and oily hands, for example, after engine bulkheads. Spraying a little money on your hands, they are wiped with a cloth to remove dirt, after which you need to wash your hands with soap and water several times.
Removing old stickersRemoving stickers from any surface is very ungrateful occupation.No matter how careful you are, the sticker will still break, and the adhesive backing will remain on the surface. In order not to remove the glue mechanically and not to scratch the surface, you can use the WD-40. To remove the sticker, it is enough to apply a little liquid from the spray can, wait 3-5 minutes, after which the remnants of glue from the surface can be easily removed with a napkin.
Deleting a markerAerosol solvent is also useful for removing labels on various surfaces. To do this, spray the WD-40 on the label or moisten a napkin. From smooth surfaces the marker is removed quite easily. If the inscriptions are made with a marker on absorbent or rough surfaces, you need to wipe it several times.
Help in snow removalWhen cleaning wet snow, it constantly sticks to the shovel, which significantly complicates an already difficult business. Against the snow, this universal remedy comes to the rescue.
Removing the ringIn the workshop, various injuries sometimes occur. If you hit a finger on which an engagement ring or other ring is worn, then when the finger or joint is swollen, it will be very problematic to remove it.If there is no damage to the skin, the finger can be moistened from the aerosol can, which will make it easier to remove the ring from the swelling finger.
Cleaning the kitchen sinkEven such material as stainless steel, from which kitchen sinks do, is prone to outgrowths of various deposits. To clean the metal surface from difficult to remove stains, use WD-40. After spraying the contamination agent, wait about 5 minutes for the solvent to absorb into the sediment. Softened deposits are removed with a plastic scraper, and if necessary, the treatment is repeated. Tip! After cleaning, do not forget to wash it and all used appliances with warm water and detergent.
Cleaning of metal and cast iron products from rustWD-40 is great for metal cleaning ( including cast iron) from rust. On the surface, affected by rust or other deposits, apply a remedy and allow to stand for 3-5 minutes.In order to evaporate the solvent more slowly, a pipe or other product can be wound with a cloth moistened with medium. After the rust has softened a little, proceed to mechanical cleaning with a grinder, sandpaper or other grinding tools. Such processing significantly speeds up the process of removing rust and prevents its re-formation.
Processing vinyl recordsYou can use a small cloth slightly moistened with this tool to remove dirt and lubricate the plates at the same time. A napkin gently wipe the plastic, removing a layer of wax dirt accumulated on vinyl. But you shouldn’t be too zealous and plentifully wet the record.
How not to use WD-40
- Any electronics: solvent ,contained in an aerosol, can corrode some plastics and thin tracks on electronic circuit boards.
- Door hinges, bicycle and other chains. For these purposes, it is better to use conventional grease on a more fat basis.
- Door locks. If the lock larva is jammed, you can try to lubricate it with an aerosol, but you should not count on a long-term effect as a lubricant. Rubik's Cube and other plastics. As already noted, WD-40 can soften or break (melt) some plastics. Therefore, a silicone spray is recommended for this purpose, and not a solvent-based agent.
Protection against a thief with a simple electronic key
Lamps from used bottles. TOP 23
Sessun - haircut with an unusual name
How can you lose weight teen
How to get rid of corns on the toes
Kindergarten Christmas Crafts