How easy it is to fix a hand power tool

There is a great need to fix the bulgark in a stationary state. Say sharpen the drill if there is no stationary sandpaper on hand. I will show how to make an incredibly simple stand on which it will be possible to fix not only the grinder, but also other tools, such as a drill, a Dremel, a building hair dryer, and so on.

Making a stand for a power tool

Sawing rectangular piece of chipboard with dimensions larger than your tool.
How easy it is to fix a hand power tool
It will not be enough to have one such plate, as it is too light, so we will cut out another one. We apply on top and draw a marker along the contour.
How easy it is to fix a hand power tool
Cut it out with a hacksaw or jigsaw.
How to simply fix the hand power tool
We fasten the screws with four sides,pre-drilled holes.
How easy it is to fix a hand power tool
Flip the bolts down so they don't spoil the view.
How easy it is to fix a hand power tool
We put a grinder in the middle, which needs to be fixed motionless.
How easy it is to fix a hand power tool
And mark the places for future fixtures.
How easy it is to fix a hand power tool
We need two more of these clamps. Such pipes are fixed, there are plenty of them in construction stores of absolutely any diameter.
Thread Clamp
Drill a hole for plastic dowels.
How to simply lock the power tool
We insert them into the holes with a hammer. How to simply fix the power tool
Screw the screw stands. Screw clamps.
How easy it is to fix a hand power tool
Set the grinder in place.
How easy it is to fix a hand power tool
Fix the clamps, fastening attachment.
How easy it is to fix a hand power tool
Rubber pads will not create excessive force on the body of the tool and will not let it move anywhere. Now you can work.
How easy it is to fix a hand power tool
If necessary, turn to the side. Very convenient.
How easy it is to fix a hand power tool
And sharpen everything you want: even knives, even drills.
How easy it is to fix a hand power tool
You can also fix a Dremel.
How easy it is to fix a hand power tool
Fix a building hair dryer. All examples are straightforward. The stand is very simple and very comfortable. With a slight vibration, it will not turn over. Also, before working, it is necessary to hold the trigger or tool switch with a plastic tie or in another way. When working with the tool in this position, be extremely vigilant. I recommend to make a foot dummy button so that when you press it with your foot, the tool turns on.

Related News


What products can replace meat
Do-it-Yourself Gift Set Grow Greens
19 old pedagogical councils that are relevant to this day
Draws of famous people on April 1
How to care for a money tree at home
Weather in Abkhazia in July 2018 - forecast of weather forecasters of the Hydrometeorological Center for air and water temperature